Plasterboard

Gyprock Plus is a premium, lightweight 10mm thick plasterboard with a thicker face paper that produces a crisper score and snap experience with cleaner cuts and squarer edges. Optimised Core technology also provides greater breaking strength in a substantially lighter board that continues to exceed the performance requirements of Australian Standard AS/NZS 2588. Typical Applications Gyprock Plus is typically used as a wall lining option in residential applications but can also be used on ceilings with standard 450mm joist centres. It is most suitable for areas of the home where exposure to moisture is not a concern such as bedrooms, living areas and entrance ways. Recommendation Gyprock Plus is best for ceilings with standard 450mm joist centres. In situations where the ceiling joists span 600mm centres, it is best to select Gyprock Supaceil. Product Options Gyprock Plus is available in the following sizes: Thickness 10mm Widths 1200mm1350mm Lengths 2400mm2700mm3000mm3600mm4200mm4800mm5400mm6000mm Edge Profiles Recessed Edge for regular jointing, Recessed Edge/Square Edge for low profile architectural mouldings Manufacturing Tolerances Nominal Thickness 10mm ± 0.5mm Nominal Widths 1200 and 1350mm ± 3mm Nominal Lengths From 2400 to 6000mm ± 5mm, typically in 300mm increments Squareness Cut ends ± 3mm in the width of the board Physical Properties Nominal Board Weight* 5.7kg/m2 Thermal Resistance 0.04-0.05 m2K/W Fire Hazard Properties∆ Group No = 1SMOGRARC <100 m2/s2 Combustibility◊ Plasterboard may be used wherever a non-combustible material is required. Total Recycled Content 7.0% * Subject to reasonable manufacturing variance∆ In accordance with AS ISO 9705 and AS 5637.1 ◊ In accordance with NCC2022 Vol 1 Clause C2D10(6)(a) and NCC2019 Amdt1 Vol Clause C1.9(e)(i).

Read more less

Gyprock Supaceil was the first product in Australia manufactured with Optimised Core technology which provides an advanced performance-to-weight ratio, meaning greater breaking strength in a substantially lighter board that continues to exceed the performance requirements of Australian Standard AS/NZS 2588. This improved strength ensures it will stay flatter, even when installed on ceiling joists with 600mm centres. There is also less chance of fixings pulling through the board when extra pressure from above is applied such as heavy ceiling insulation. The board’s thicker face paper produces a crisper score and snap experience with cleaner cuts and squarer edges. Typical Applications Gyprock Supaceil is typically used as a superior ceiling lining option in residential applications and can be used to span up to 600mm joist centres. It is most suitable for areas of the home where exposure to moisture is not a concern such as bedrooms, living areas and entranceways. Product Options Gyprock Supaceil is available in the following sizes: Thickness 10mm Widths 900mm (WA Only)1200mm1350mm Lengths 2400mm2700mm3000mm3600mm4200mm4800mm5400mm6000mm Edge Profiles Recessed Edge for regular jointing Manufacturing Tolerances Nominal Thickness 10mm ± 0.4mm Nominal Widths 900mm, 1200mm and 1350mm ± 3mm Nominal Lengths From 2400mm to 6000mm ± 5mm, typically in 300mm increments Squareness Cut ends ± 3mm in the width of the board Physical Properties Nominal Board Weight* 6.1kg/m2, 6.2kg/m2 (WA) Thermal Resistance 0.04 – 0.05 m2K/W Fire Hazard Properties∆ Group No = 1SMOGRARC <100 m2/s2 Combustibility◊ Plasterboard may be used wherever a non-combustible material is required. Total Recycled Content 6.2% * Subject to reasonable manufacturing variance∆ In accordance with AS ISO 9705 and AS 5637.1 ◊ In accordance with NCC2022 Vol 1 Clause C2D10(6)(a) and NCC2019 Amdt1 Vol Clause C1.9(e)(i).

Read more less

Gyprock Aquachek 10mm offers the same moisture resistance and tile weight capacity, now in a lighter board that is easier to work with. The 10mm wall and ceiling plasterboard is designed as the perfect lining for wet areas in residential applications. Product Overview The core, face and back of Gyprock Aquachek 10mm are treated to make it resistant to moisture and humidity without compromising integrity. It is specifically designed for use as a wall and ceiling lining in wet areas of residential buildings. It can be easily identified by its blue coloured face paper. Gyprock Aquachek 10mm is manufactured to meet or exceed the requirements of water-resistant grade gypsum plasterboard as per AS/NZ 2588 Gypsum Plasterboard and satisfies the requirements of the Building Code of Australia for wet area wall linings in residential buildings when installed according to Gyprock installation guides. Refer to Australian Standard AS3740 - Waterproofing of Wet Areas in Residential Buildings for additional requirements. Typical Applications In residential projects Gyprock Aquachek 10mm is ideal for use in bathrooms, laundries, ensuites, toilets and protected external ceilings like soffits and verandahs. Because Aquachek 10mm is not subject to moisture movement and has extremely low water absorption characteristics, it provides an excellent, stable substrate for ceramic tiles. Tested Moisture Performance Gyprock wet area plasterboard products are manufactured with special additives to enhance the moisture resistance of their core. The additives also permeates the face and back paper of the board, delivering superior performance in wet area and high humidity applications. Water resistance Water resistance is tested by submerging a sample of plasterboard in a body of water for two hours. Surface water resistance Surface water resistance testing sees the plasterboard sample weighed pre-and-post surface exposure to water. Product Options Gyprock Aquachek 10mm is available in the following sizes: Thickness 10mm Widths 1200mm1350mm Lengths 2400mm2700mm3000mm4200mm4800mm6000mm Edge Profiles Recessed Edge for regular jointing Manufacturing Tolerances Nominal Thickness 10mm ± 0.5mm Nominal Widths 1200 and 1350mm ± 3mm Nominal Lengths From 2400 to 6000mm ± 5mm, typically in 300mm increments Squareness Cut ends ± 3mm in the width of the board Physical Properties Nominal Board Weight* 7.1kg/m2 Thermal Resistance 0.05 m2K/W Fire Hazard Properties∆ Group No = 1SMOGRARC <100 m2/s2 Combustibility◊ Plasterboard may be used wherever a non-combustible material is required. Total Recycled Content 4.9% *Subject to reasonable manufacturing variance.∆ In accordance with AS ISO 9705 and AS 5637.1 ◊ In accordance with NCC2022 Vol 1 Clause C2D10(6)(a) and NCC2019 Amdt1 Vol Clause C1.9(e)(i).

Read more less

This board sets the Standard for commercial applications. Gyprock Standard 13mm works as a general internal wall and ceiling lining in a huge range of commercial applications. Product Overview Gyprock Standard 13mm is manufactured in Australia to meet and exceed the requirements of Australian Standard AS/NZS 2588. The go-to for commercial construction, Gyprock Standard 13mm can also be used residential to deliver a more robust, acoustically sound lining.  Typical Applications Gyprock Standard 13mm is typically used as a wall and ceiling lining option in commercial applications including non-fire or acoustic rated walls and partitions. Product Options Gyprock Standard 13mm is available in the following sizes: Thickness 13mm Widths 900mm1200mm1350mm1400mm Lengths 2400mm2700mm3000mm3600mm4200mm4800mm6000mm Edge Profiles Recessed Edge for regular jointingRecessed Edge/Square Edge for low profile architectural mouldingsSquare Edge for applications not requiring jointing Manufacturing Tolerances Nominal Thickness 13mm ± 0.5mm Nominal Widths 900mm, 1200mm, 1350mm, and 1400mm ± 3mm Nominal Lengths From 2400 to 6000mm ± 5mm, typically in 300mm increments Squareness Cut ends ± 3mm in the width of the board. Physical Properties Nominal Board Weight* 8.5kg/m2 Thermal Resistance 0.05 - 0.07 m2K/W Fire Hazard Properties∆ Group No = 1SMOGRARC <100 m2/s2 Combustibility◊ Plasterboard may be used wherever a non-combustible material is required. Total Recycled Content 3.7% * Subject to reasonable manufacturing variance∆ In accordance with AS ISO 9705 and AS 5637.1 ◊ In accordance with NCC2022 Vol 1 Clause C2D10(6)(a) and NCC2019 Amdt1 Vol Clause C1.9(e)(i).

Read more less

Gyprock Aquachek 13mm is a moisture resistant wall and ceiling plasterboard designed as the perfect lining for wet areas in commercial applications. Product Overview The core, face and back of Gyprock Aquachek 13mm are treated to make it resistant to moisture and humidity without compromising integrity. It is specifically designed for use as a wall and ceiling lining in wet areas of commercial buildings. It can be easily identified by its blue coloured face paper. Gyprock Aquachek 13mm is manufactured to meet or exceed the requirements of water resistant grade gypsum plasterboard as per AS/NZ 2588 Gypsum Plasterboard, and satisfies the requirements of the Building Code of Australia for wet area wall linings in commercial buildings when installed according to Gyprock installation guides. Refer to Australian Standard AS3740 - Waterproofing of Wet Areas in Residential Buildings for additional requirements. Typical Applications In commercial projects Gyprock Aquachek 13mm is typically used in showers/change rooms, restrooms, laundries and kitchens, hospital ward bathrooms and soffits. Because Aquachek 13mm is not subject to moisture movement and has extremely low water absorption characteristics, it provides an excellent, stable substrate for ceramic tiles. Tested Moisture Performance Gyprock wet area plasterboard products are manufactured with special additives to enhance the moisture resistance of their core. The additives also permeates the face and back paper of the board, delivering superior performance in wet area and high humidity applications. Water resistance Water resistance is tested by submerging a sample of plasterboard in a body of water for two hours. Surface water resistance Surface water resistance testing sees the plasterboard sample weighed pre-and-post surface exposure to water. Product Options Gyprock Aquachek 13mm is available in the following sizes: Thickness 13mm Widths 1200mm1350mm Lengths 2400mm2700mm3000mm4200mm4800mm6000mm Edge Profiles Recessed Edge for regular jointing Manufacturing Tolerances Nominal Thickness 13mm ± 0.5mm Nominal Widths 1200 and 1350mm ± 3mm Nominal Lengths From 2400 to 6000mm ± 5mm, typically in 300mm increments Squareness Cut ends ± 3mm in the width of the board Physical Properties Nominal Board Weight* 9.8kg/m2 Thermal Resistance 0.06 m2K/W Fire Hazard Properties∆ Group No = 1SMOGRARC <100 m2/s2 Combustibility◊ Plasterboard may be used wherever a non-combustible material is required. Total Recycled Content 3.9% *Subject to reasonable manufacturing variance.∆ In accordance with AS ISO 9705 and AS 5637.1 ◊ In accordance with NCC2022 Vol 1 Clause C2D10(6)(a) and NCC2019 Amdt1 Vol Clause C1.9(e)(i).

Read more less

Gyprock Soundchek provides sound control worth shouting about. This high density gypsum plasterboard has improved sound transmission properties to help maintain the peace when used in residential and commercial walls and ceilings. Product Overview Gyprock Soundchek features a specially formulated dense core to increase its sound transmission performance and provide a higher level of soft and hard body impact resistance. Soundchek provides effective airborne noise and impact noise insulation. Higher levels of noise control can be achieved by including bulk acoustic insulation in the Soundchek wall cavity.  Gyprock Soundchek is easily identified by the yellow colour of the face paper.  Typical Applications: Gyprock Soundchek is available in two thicknesses. Typically the 10mm product is used in residential walls and ceilings to create quiet zones and reduce disturbance from other activities within the home. It is ideal for use around studies, nurseries, bedrooms, laundries, ensuites, home theatres and for ceilings between storeys.  The 13mm product is suitable for use in commercial projects in areas where noise transfer can be a concern such as; meeting rooms, intertenancy walls in multi-residential developments, bedrooms and ensuites in hotels and hospitals, acoustic bulkheads and shafts.   Gyprock Soundchek is not suitable where it would be in contact with water or a constant relative humidity above 90%. Superior Acoustic Performance Gyprock acoustic plasterboard products fall into two categories – those for preventing sound transmission, and those designed to provide sound absorption. Sound transmission products are manufactured with a denser core, providing a physical barrier to prevent sound moving to adjoining spaces. Absorptive plasterboard products feature perforations to help reduce echo and improve acoustics within a room. While the selection of an acoustic plasterboard lining alone will improve performance, CSR provides a range of wall and ceiling systems which deliver superior results for transmission or absorption, through a combination of plasterboard, insulation, fixing methods, plenums and framing configuration. Product Options Gyprock Soundchek is available the following sizes: Thickness 10mm13mm Widths 1200mm1350mm Lengths 2400mm2700mm3000mm3600mm4200mm4800mm Edge Profiles Recessed Edge for regular jointing Manufacturing Tolerances Nominal Thickness 10mm ± 0.4mm, 13mm ± 0.5mm Nominal Widths 1200mm ± 3mm, 1350mm ± 3mm Nominal Lengths From 2400 to 4800 ± 5mm, typically in 600mm increments Squareness Cut ends ± 3mm in the width of the board Physical Properties  10mm  13mm Nominal Board Weight* 9.3kg/m2 13kg/m2 Thermal Resistance 0.04 – 0.05 m2K/W 0.05 – 0.07 m2K/W Fire Hazard Properties∆ Group No = 1SMOGRARC <100 m2/s2 Combustibility◊ Plasterboard may be used wherever a non-combustible material is required. Total Recycled Content 10% 10% * Subject to reasonable manufacturing variance∆ In accordance with AS ISO 9705 and AS 5637.1 ◊ In accordance with NCC2022 Vol 1 Clause C2D10(6)(a) and NCC2019 Amdt1 Vol Clause C1.9(e)(i).

Read more less

Bustling household or commercial environment? Gyprock Impactchek is a high-strength 13mm thick plasterboard with a reinforced core that is an ideal wall lining for high impact areas. Product Overview Impactchek is proven to effectively reduce the damage caused by soft and hard body impact. The layer of glass fibre mesh, denser core and heavy duty lining paper provide a hardier, scuff resistant plasterboard lining for residential and commercial applications. This plasterboard is also a fire and acoustic grade board, ideal for high impact areas where acoustic separation or a fire rated system is specified. Typical Applications: Impactchek is typically used in areas such as corridors, foyers, classrooms, retail walls, games rooms and garages where the risk of damage from soft body impact such as balls and bags and hard body impact such as trolleys and furniture is generally higher. Tested Impact Performance Gyprock impact resistant plasterboard products are manufactured with a heavier lining paper, and special additives to enhance the durability of their core. Typically, these products can withstand twice the discernible force of regular plasterboard products, making them ideal for high traffic areas. Hard body impact Hard body impact is assessed by dropping a 50mm steel ball onto the plasterboard surface from increasing heights. Soft body impact Soft body impact testing sees a weighted bag swung on a pendulum, striking the plasterboard surface. Product Options Gyprock Impactchek is available in the following sizes: Thickness 13mm Widths 1200mm Lengths 2400mm2700mm3000mm3600mm4200mm4800mm Edge Profiles Recessed Edge for regular jointing. Manufacturing Tolerances Nominal Thickness 13mm ± 0.5mm Nominal Widths 1200 ± 3mm Nominal Lengths From 2400 to 4800 ± 5mm, typically in 300mm increments Squareness Cut ends ± 3mm in the width of the board Physical Properties Nominal Board Weight* 10.5kg/m2 Thermal Resistance 0.05 – 0.07 m2K/W Fire Hazard Properties∆ Group No = 1SMOGRARC <100 m2/s2 Combustibility◊ Plasterboard may be used wherever a non-combustible material is required. Total Recycled Content° 10.4%  * Subject to reasonable manufacturing variance∆ In accordance with AS ISO 9705 and AS 5637.1 ◊ In accordance with NCC2022 Vol 1 Clause C2D10(6)(a) and NCC2019 Amdt1 Vol Clause C1.9(e)(i).°This plasterboard may require extra processing when recycling due to the presence of glass fibre mesh material.

Read more less

Gyprock Fyrchek has been developed to take the heat. Fyrchek’s specially processed glass fibre-reinforced gypsum core makes it ideal for use in fire rated wall and ceiling systems and where improved acoustic performance is required. Product Overview Fyrchek’s glass fibre-reinforced core enables it to maintain structural integrity when subjected to direct flame making it an ideal board for use as part of a fire rated wall or ceiling system. This plasterboard is also an acoustic grade board and can be used in systems where acoustic separation is specified. Gyprock Fyrchek can be easily identified by its pink coloured face paper. Typical Applications Fyrchek is predominantly specified for commercial installations in areas where there is a higher level of fire resistance and/or acoustic performance required.   Typical applications include: Fire separation and smoke walls Intertenancy walls and party walls Multi-residential unit ceilings Lift wells Plant rooms Any non-wet area wall or ceiling where a fire or acoustic rated system is specified Tested Fire Performance Gyprock fire rated plasterboard products are manufactured with special additives to enhance their fire resistance properties. The additives slow the progress of heat and flame, and when used as part of a CSR fire rated system, provide performance options suitable for many construction types. CSR provides a range of wall and ceiling systems, junction and penetration details, which meet and exceed the requirements of the Building Code of Australia. These solutions often include a combination of plasterboard, insulation, sealants and accessories to reach various performance criteria. Product Options Gyprock Fyrchek is available in the following sizes: Thickness 13mm16mm Widths 1200mm1350mm Lengths 2400mm2700mm3000mm3600mm4200mm4800mm Edge Profiles Recessed Edge for regular jointing Manufacturing Tolerances Nominal Thickness 13mm and 16mm ± 0.5mm Nominal Widths 1200mm and 1350mm ± 3mm Nominal Lengths From 2400 to 4800 ± 5mm, typically in 300mm increments Squareness Cut ends ± 3mm in the width of the board Physical Properties 13mm 16mm Nominal Board Weight* 10.5kg/m2 12.5kg/m2 Thermal Resistance 0.05 - 0.07 m2K/W 0.07 – 0.09 m2K/W Fire Hazard Properties∆ Group No = 1SMOGRARC <100 m2/s2 Combustibility◊ Plasterboard may be used wherever a non-combustible material is required. Total Recycled Content 9.1% 9.0% * Subject to reasonable manufacturing variance∆ In accordance with AS ISO 9705 and AS 5637.1 ◊ In accordance with NCC2022 Vol 1 Clause C2D10(6)(a) and NCC2019 Amdt1 Vol Clause C1.9(e)(i).

Read more less

Gyprock Fyrchek MR combines a fire and acoustic grade board with additional moisture resistance to create the ideal lining for fire rated wall and ceiling systems in wet areas. Fyrchek MR’s glass fibre-reinforced core enables it to maintain structural integrity when subjected to direct flame. The additional moisture resistant properties make it an ideal board for use as part of a fire rated wall or ceiling system in wet areas or application subjected to high humidity. This plasterboard is also an acoustic grade board and can be used in systems where acoustic separation is specified. Gyprock Fyrchek MR can be easily identified by its blue coloured face paper. Typical Applications Fyrchek MR  is predominantly specified for commercial installations in areas where there is a higher level of fire and moisture resistance. It is primarily intended for walls and ceilings in wet area rooms, soffits and external eaves that must achieve fire resistance.

Read more less

Gyprock Fyrchek has been developed to take the heat. Fyrchek’s specially processed glass fibre-reinforced gypsum core makes it ideal for use in fire rated wall and ceiling systems and where improved acoustic performance is required. Product Overview Fyrchek’s glass fibre-reinforced core enables it to maintain structural integrity when subjected to direct flame making it an ideal board for use as part of a fire rated wall or ceiling system. This plasterboard is also an acoustic grade board and can be used in systems where acoustic separation is specified. Gyprock Fyrchek can be easily identified by its pink coloured face paper. Typical Applications Fyrchek is predominantly specified for commercial installations in areas where there is a higher level of fire resistance and/or acoustic performance required.   Typical applications include: Fire separation and smoke walls  Intertenancy walls and party walls Multi-residential unit ceilings Lift wells Plant rooms Any non-wet area wall or ceiling where a fire or acoustic rated system is specified Tested Fire Performance Gyprock fire rated plasterboard products are manufactured with special additives to enhance their fire resistance properties. The additives slow the progress of heat and flame, and when used as part of a CSR fire rated system, provide performance options suitable for many construction types. CSR provides a range of wall and ceiling systems, junction and penetration details, which meet and exceed the requirements of the Building Code of Australia. These solutions often include a combination of plasterboard, insulation, sealants and accessories to reach various performance criteria. Product Options Gyprock Fyrchek is available in the following sizes: Thickness 13mm16mm Widths 1200mm1350mm Lengths 2400mm2700mm3000mm3600mm4200mm4800mm Edge Profiles Recessed Edge for regular jointing Manufacturing Tolerances Nominal Thickness 13mm and 16mm ± 0.5mm Nominal Widths 1200mm and 1350mm ± 3mm Nominal Lengths From 2400 to 4800 ± 5mm, typically in 300mm increments Squareness Cut ends ± 3mm in the width of the board Physical Properties 13mm 16mm Nominal Board Weight* 10.5kg/m2 12.5kg/m2 Thermal Resistance 0.05 - 0.07 m2K/W 0.07 – 0.09 m2K/W Fire Hazard Properties∆ Group No = 1SMOGRARC <100 m2/s2 Combustibility◊ Plasterboard may be used wherever a non-combustible material is required. Total Recycled Content 9.1% 9.0% * Subject to reasonable manufacturing variance∆ In accordance with AS ISO 9705 and AS 5637.1 ◊ In accordance with NCC2022 Vol 1 Clause C2D10(6)(a) and NCC2019 Amdt1 Vol Clause C1.9(e)(i).

Read more less

Gyprock Fyrchek MR combines a fire and acoustic grade board with additional moisture resistance to create the ideal lining for fire rated wall and ceiling systems in wet areas. Product Overview Fyrchek MR’s glass fibre-reinforced core enables it to maintain structural integrity when subjected to direct flame. The additional moisture resistant properties make it an ideal board for use as part of a fire rated wall or ceiling system in wet areas or application subjected to high humidity. This plasterboard is also an acoustic grade board and can be used in systems where acoustic separation is specified. Gyprock Fyrchek MR can be easily identified by its blue coloured face paper. Typical Applications Fyrchek MR  is predominantly specified for commercial installations in areas where there is a higher level of fire and moisture resistance. It is primarily intended for walls and ceilings in wet area rooms, soffits and external eaves that must achieve fire resistance. Tested Fire Performance Gyprock fire rated plasterboard products are manufactured with special additives to enhance their fire resistance properties. The additives slow the progress of heat and flame, and when used as part of a CSR fire rated system, provide performance options suitable for many construction types. CSR provides a range of wall and ceiling systems, junction and penetration details, which meet and exceed the requirements of the Building Code of Australia. These solutions often include a combination of plasterboard, insulation, sealants and accessories to reach various performance criteria. Product Options Gyprock Fyrchek MR is available in the following sizes: Thickness 13mm16mm Widths 1200mm Lengths 2700mm3000mm3600mm Edge Profiles Recessed Edge for regular jointing Manufacturing Tolerances Nominal Thickness 13mm and 16mm ± 0.5mm Nominal Widths 1200mm  ± 3mm Nominal Lengths From 2700 to 3600 ± 5mm, typically in 300mm increments Squareness Cut ends ± 3mm in the width of the board Physical Properties 13mm 16mm Nominal Board Weight* 10.8kg/m2 12.9kg/m2 Thermal Resistance 0.05 - 0.07 m2K/W 0.07 – 0.09 m2K/W Fire Hazard Properties∆ Group No = 1SMOGRARC <100 m2/s2 Combustibility◊ Plasterboard may be used wherever a non-combustible material is required. Total Recycled Content 9.3% 8.4% * Subject to reasonable manufacturing variance∆ In accordance with AS ISO 9705 and AS 5637.1 ◊ In accordance with NCC2022 Vol 1 Clause C2D10(6)(a) and NCC2019 Amdt1 Vol Clause C1.9(e)(i).

Read more less

Designed to impress, Gyprock Flexible 6.5mm plasterboard enables specifiers, designers and installers to easily create curved walls and ceilings and add visual interest to a space. Product Overview Gyprock Flexible is a 6.5mm thick plasterboard sheet with an enhanced gypsum core, designed to bend for small radius curves.From concept to creation, designers and installers can create convex curves with a 250mm radius and concave curves with a 450mm radius.  Typical Applications Gyprock Flexible is typically used to create curved feature walls and ceilings, and for the creative encasement of columns.This plasterboard is installed in two layers for increased strength. Product Options Gyprock Flexible is available in the following sizes: Thickness 6.5mm Widths 1200mm Lengths 3600mm Edge Profiles Recessed Edge for regular jointing, Recessed Edge/Square Edge for low profile architectural mouldings Manufacturing Tolerances Nominal Thickness 6.5mm ± 0.5mm Nominal Widths 1200 ± 3mm Nominal Lengths 3600mm ± 5mm Squareness Cut ends ± 3mm in the width of the board Physical Properties Nominal Board Weight* 4.3kg/m2 Thermal Resistance 0.03 m2K/W Fire Hazard Properties∆ Group No = 1SMOGRARC <100 m2/s2 Combustibility◊ Plasterboard may be used wherever a non-combustible material is required. Total Recycled Content 10.2% * Subject to reasonable manufacturing variance∆ In accordance with AS ISO 9705 and AS 5637.1 ◊ In accordance with NCC2022 Vol 1 Clause C2D10(6)(a) and NCC2019 Amdt1 Vol Clause C1.9(e)(i).

Read more less

Gyprock Shaft Liner MP provides enhanced protection against mould growth for extra peace of mind during the early stages of construction. Product Overview Shaft Liner MP, like standard Shaft Liner panel has a glass fibre-reinforced core encased in a heavy duty linerboard. This enables it to resist fire and make it ideal for use as part of a fire rated wall or ceiling system. These panels also offer exceptional acoustic insulation properties and are used in Gyprock commercial wall and ceiling systems where a high fire rating or high acoustic performance is specified.  New Shaft Liner MP panel is manufactured with a powerful but gentle antifungal agent that permeates the plasterboard core, as well as the face and back paper of the board, providing enhanced protection against the possibility of mould growth during the early stages of construction. Gyprock Shaft Liner MP Panel can be identified by its blue coloured face paper. Typical Applications Shaft Liner MP is predominantly specified for the internal barrier lining within Gyprock fire and/or acoustic wall and ceiling systems such as Party Wall Systems. Typical applications include: • Intertenancy walls and party walls  • Multi-residential unit ceilings  • Stairwells • Lift wells  • Service shafts Product Options Gyprock Shaft Liner MP is available in the following sizes: Thickness 25mm Widths 600mm Lengths 3000mm3600mm Edge Profiles Square Edge for applications not requiring jointing Manufacturing Tolerances Nominal Thickness 25mm ± 0.5mm Nominal Widths 600mm ± 3mm Nominal Lengths From 3000mm and 3600 ± 5mm Squareness Cut ends ± 3mm in the width of the board Physical Properties Nominal Board Weight* 19.8kg/m2 Thermal Resistance 0.14 m2K/W Fire Hazard Properties∆ Group No = 1SMOGRARC <100 m2/s2 Combustibility◊ Plasterboard may be used wherever a non-combustible material is required. Total Recycled Content° 9.3% * Subject to reasonable manufacturing variance∆ In accordance with AS ISO 9705 and AS 5637.1 ◊ In accordance with NCC2022 Vol 1 Clause C2D10(6)(a) and NCC2019 Amdt1 Vol Clause C1.9(e)(i).° This plasterboard may require extra processing when recycling due to the presence of glass fibre mesh material.

Read more less

Complete by name and Complete by nature: for commercial environments, this ultimate plasterboard is specifically engineered to meet the highest standards across a broad range of performance requirements. Product Overview EC08 Complete is manufactured with a dense, fibre-reinforced core and is specially formulated to provide superior performance for mould, impact, fire, acoustic and moisture resistance making it an excellent choice for most commercial applications. All boards in the EC08 range contain high levels of recycled content and are manufactured to AS/NZS 2588 – Gypsum Plasterboard. Their low VOC emissions make them an ideal choice for applications where maintaining high levels of indoor air quality is important. EC08 Complete is easily identified by its green coloured face paper. Typical Applications: EC08 Complete is typically used as a wall and ceiling lining in commercial green building projects where a high level of impact, fire, moisture and mould resistance is required and high levels of recycled content are desired. This includes all green building projects and applications where maintaining high levels of indoor air quality is important such as schools, health and aged care. Product Options Gyprock EC08 Complete is available in the following sizes. Thickness 13mm16mm Widths 1200mm Lengths 3000mm3600mm Edge Profiles Recessed Edge for regular jointing Manufacturing Tolerances Nominal Thickness 13mm and 16mm ± 0.5mm Nominal Widths 1200mm ± 3mm Nominal Lengths 3000mm and 3600mm ± 5mm Squareness Cut ends ± 3mm in the width of the board Physical Properties 13mm 16mm Nominal Board Weight* 12.4kg/m2 14.8kg/m2 Thermal Resistance 0.05 - 0.07 m2K/W 0.07 – 0.09 m2K/W VOC level (as per GBCA limits) 0.043 mg/m2 /hr Fire Hazard Properties∆ Group No = 1SMOGRARC <100 m2/s2 Combustibility◊ Plasterboard may be used wherever a non-combustible material is required. Total Recycled Content 21.3% 21.2% * Subject to reasonable manufacturing variance∆ In accordance with AS ISO 9705 and AS 5637.1 ◊ In accordance with NCC2022 Vol 1 Clause C2D10(6)(a) and NCC2019 Amdt1 Vol Clause C1.9(e)(i).

Read more less

Complete by name and Complete by nature: for commercial environments, this ultimate plasterboard is specifically engineered to meet the highest standards across a broad range of performance requirements. Product Overview EC08 Complete is manufactured with a dense, fibre-reinforced core and is specially formulated to provide superior performance for mould, impact, fire, acoustic and moisture resistance making it an excellent choice for most commercial applications. All boards in the EC08 range contain high levels of recycled content and are manufactured to AS/NZS 2588 – Gypsum Plasterboard. Their low VOC emissions make them an ideal choice for applications where maintaining high levels of indoor air quality is important. EC08 Complete is easily identified by its green coloured face paper. Typical Applications: EC08 Complete is typically used as a wall and ceiling lining in commercial green building projects where a high level of impact, fire, moisture and mould resistance is required and high levels of recycled content are desired. This includes all green building projects and applications where maintaining high levels of indoor air quality is important such as schools, health and aged care. Tested Impact Performance Gyprock impact resistant plasterboard products are manufactured with a heavier lining paper, and special additives to enhance the durability of their core. Typically, these products can withstand twice the discernible force of regular plasterboard products, making them ideal for high traffic areas. Hard body impact Hard body impact is assessed by dropping a 50mm steel ball onto the plasterboard surface from increasing heights. Soft body impact Soft body impact testing sees a weighted bag swung on a pendulum, striking the plasterboard surface. Product Options Gyprock EC08 Complete is available in the following sizes. Thickness 13mm16mm Widths 1200mm Lengths 3000mm3600mm Edge Profiles Recessed Edge for regular jointing Manufacturing Tolerances Nominal Thickness 13mm and 16mm ± 0.5mm Nominal Widths 1200mm ± 3mm Nominal Lengths 3000mm and 3600mm ± 5mm Squareness Cut ends ± 3mm in the width of the board Physical Properties 13mm 16mm Nominal Board Weight* 12.4kg/m2 14.8kg/m2 Thermal Resistance 0.05 - 0.07 m2K/W 0.07 – 0.09 m2K/W VOC level (as per GBCA limits) 0.043 mg/m2 /hr Fire Hazard Properties∆ Group No = 1SMOGRARC <100 m2/s2 Combustibility◊ Plasterboard may be used wherever a non-combustible material is required. Total Recycled Content 21.3% 21.2% * Subject to reasonable manufacturing variance∆ In accordance with AS ISO 9705 and AS 5637.1 ◊ In accordance with NCC2022 Vol 1 Clause C2D10(6)(a) and NCC2019 Amdt1 Vol Clause C1.9(e)(i).

Read more less